M Performance Logo Sticker Decal Badge BMW M1 M2 M3 M4 M5 M6 Small Medium Large
1 x M Performance Decal Exactly as pictured Three sizes:Small – H 12mm, L 141mm;Medium – H 20mm, L 235mm;Large – H 25mm, L 293mm. Any questions, please ask. All our products are made to order. Yes, we are humans. Yes, we make a mistakes. If it occurs, write to us, we will certainly be able to fix it. Leaving negative feedback is not the best solution. How to apply 1. Clean your destination surface. The cleaner the better. 2. With your decal as-is (still taped up), lay your decal (backing-side down, transfer-tape-side up) and align as you like it. It should be adhesive side down, looking like it will look after being applied. Once you get it lined up how you like it… 3. Using a sharp angle, start in a corner and peel away the decals backing (away from the transfer tape that is holding the vinyl image).Careful not to scratch your surface or cut your vinyl image. Do not try and tear the paper, this will create fuzz and dust that may create bumps under the decal. 4. Using any squeegee like an item (a credit card works well), begin to lay your graphic down onto your prepared surface. 5. Squeegee the entire image a few times, from the centre outward, each time with greater pressure, making sure that all of it is good and pressed onto the surface.Take care to not allow air bubbles to form between the vinyl and the surface. 6. Once you feel it is pressed on as good as can be, begin peeling the transfer tape off using a sharp angle against itself. If the image comes off the surface (sticking to the transfer tape), simply lay back down, and squeegee as before, then try again – remember, a sharp angle works best when separating vinyl from either the backing or the tape. If the decal does not stick, the surface was not fully cleaned and may have oils or dust. 7. Please do not wash your car for a few days allowing the sticker to settle down.